Mimaki Flatbed Cutting Plotter - CFL-605RT Series

Compact & Multi Cutting －Rapidly bringing ideas into shape－

The CFL-605RT supports material sizes up to A2 extra and has a variety of functions including eccentric, tangential, and reciprocating cuttings and creasing. It is designed with Mimaki’s well-established technology, and supports on-demand production by multiple functions, including cutting and creasing. The CFL-605RT delivers efficient sample and package production.

Specifications Sheet

The multifunction plotter strongly supports digital on-demand production

• Eccentric cut
• Tangential cut
• Reciprocating cut
• Creasing

The combination of CFL-605RT and UJF-6042MkII achieves package fabrication on-demand

Use in combination with the UJF-6042MkII achieves on-demand production of the original goods by providing the whole production process, including printing onto goods and packages, and cutting of cushioning materials.
* UJF-6042MkII is sold separately.

Compact multifunction cutting plotter

CFL-605RT is compact but provides a wide range of functions including eccentric, tangential, and reciprocating cuttings and creasing. Ideal for package mockup production and small-lot package production.

Reciprocating cutter for cutting cushioning material

Cushioning for packaging can also be cut with CFL-605RT. Thick materials are neatly cut by a vertical reciprocating motion. The reciprocating cutter is capable of cutting materials of up to 10-mm thickness.

Reciprocating cutter
(vertical reciprocating cutting)

The blade cuts thick materials by a vertical reciprocating motion. It is ideal for foam or cardboard cutting. In addition, the blade is capable of cutting a range of material thicknesses, from thin to thick, by precisely controlling the blade edge direction. (Before cutting, please place a felt mat on the cutting table under the material to hold it in place.)

【Optimum materials for a reciprocating cutter】
Cardboard, foam plastic board, and sponge

■Maximum vertical vibration rate: 3,000 reciprocating motions/min.
■Vibration stroke: 5 mm
■Downforce pressure: 1,500 g (Fixed pressure value)
■Maximum cutting thickness*: 10 mm (*Thickness varies depending on materials.)

Tangential cutter for thick material cutting

The blade is able to cut not only thick materials up to 2 mm but also thin films by controlling low and high downforce pressures precisely.

Tangential cutter
(Cutting materials by downforce pressure)

The blade edge is automatically and precisely controlled along contour cutting lines specified by the software. It is good for cardboard and foam board.

【Optimum materials for a tangential cutter】
Coated cardboard, reflective vinyl, rubber sheets, industrial materials, and F/G flute cardboard.

■Downforce pressure: 500–1,500 g (Optimum pressure varies depending on material)
■Maximum cutting thickness*: 2 mm (*Thickness varies depending on material)

Cutting and creasing with one compact plotter unit

The versatile CFL-605RT plotter is capable of cutting and creasing. It can be used on paper, PET as well as film.

Eccentric cutter

Maximum cutting thickness: 1 mm
Materials are properly cut with an optimal downforce setting from 30 and 1,000 g for optimum cutting.

Creasing roller

The roller creases materials and enables the creation of a perfect package. Downforce pressures are adjustable from 500 to 1,500 g depending on the material.

Accurate cutting by reading register marks

A sensor reads register marks on the material for precise cutting.

Offering various tool combinations to meet a range of work demands

Depending on application, different tools for each unit can be switched in for optimum cutting.

[Adjustable tools for each unit]
［A unit］
Pen/Tangential cutter
［B unit］
Reciprocating cutter
Tangential cutter
Creasing roller
*Tools need to be switched manually by users.

A vacuum suction system reduces lifting of material during operation by holding the material in place.