Ir a contenido

Roland: HeatSoft PLUS PTM2 -Medium Tack Polyester Transfer Mask

Precio original $88.11 - Precio original $121.24
Precio original
$88.11 - $121.24
Precio actual $88.11
Size: 20"x75'
por Roland
SKU PGM-PTM2-75-20

Roland PGM-PTM2 is a 100 percent polyester transfer tape for printed and cut graphics produced with HeatSoft PLUS ESM-HTM3 heat transfer material and Roland‚ Eco-Sol Max or Eco-Sol MAx 2 inks. This mask is designed to lift the graphic from its backing liner sheet without removing ink off the printed surface, allowing for optimum release shortly after pressing. PGM-PTM2 ensures that the graphic printed on HeatSoft PLUS HTM3, a thin stretchy heat transfer media, remains dimensionally stable during the transfer process. It keeps separate components positioned properly relative to one another, while also acting as protective barrier between the graphic and the heat press used to affix that graphic onto the garment.

Total Caliper: 4.7mil

Inkset: Eco solvent (Eco-Sol MAX)

Adhesive: Water-based natural adhesive

Backing: None


  • Textiles
  • Apparel Decoration
  • Leather Goods

Storage & Usage:

HeatSoft PLUS PGM-PTM2 Medium Tack Polyester Transfer Mask should be handled with care to keep the adhesive face of the product free of dust, debris and contaminants that can affect its adhesive capability. This product should be processed and stored in an environment of 65°- 75° F (18° -24° C) and 30 to 50% relative humidity (non-condensing) that is clean, relatively dust-free and away from direct sunlight. It is recommended to store this product in its original packaging in a cool, dry area until ready for use. If storage conditions are outside the recommended operating ranges, allow the material to acclimate to the production environment for at least 24 to 48 hours before use.

Physical Data


Apparel and Accessories

Bags and Accessories

Home Decor

Leather Goods

Ink Compatibility:


Roll Size:

30" x 75' (actual width is 29.5")

Other Available Sizes:

20" x 75' (actual width is 19.66")